Online Purchase

1/4" Omega-Ply® Stucco Embossed Aluminum on Plywood Panel DISCONTINUED

1/4" Omega-Ply® Stucco Embossed Aluminum on Plywood Panel DISCONTINUED
    Code: Omega-Ply
    Price: $0.00
    Quantity in Basket: None

    DISCONTINUED WE ARE NO LONGER STOCKING THIS ITEM: USE ALCLAD 1/4" Stucco Embossed.

    Size:
    48" x 120" Finish Both Sides
    Finish:
    Quantity:

    Product Description

    DISCONTINUED WE ARE NO LONGER STOCKING THIS ITEM: USE ALCLAD 1/4" Stucco Embossed.

    1/4" Omega-Ply® Metal Panels - Stucco Embossed Aluminum architectural panels provide a decorative accent for Commercial Building Fascias, Soffits, and Storefronts. Highly impact-resistant plywood core provides exceptional strength and rigidity. These panels are easy to handle and install at a very low cost using extruded moldings and storefront extrusions. Omega-Ply composite panels are available in 3 stucco embossed Painted colors, Regal Bronze, Polar White and Silver Metallic.

    Specifications

    Omega-Ply Veneer Metal Glazing Panels Specifications Section 08 80 00 Glazing


    PART 1 - GENERAL

    • 1.01 SCOPE
      A. Supply 1/4” Omega-Ply veneer metal glazing panels as manufactured by Laminators, Inc. and distributed by Columbia Architectural Products, Inc. dba Metal Panel Store located in Beltsville, Maryland 20705 (301)-937-4383 www.metalpanelstore.com
      B. Panels shall consist of metal laminated to stabilizer substrates with an insulating core material. Panels are designed to be glazed into a window system or curtain wall system.
    • 1.02 QUALITY ASSURANCE
      A. Manufacturer shall have a minimum of 15 years experience in the manufacturing of this type of panel.
      B. Provide all architectural panels from a single source.
      C. Field measurements shall be taken prior to the manufacturing and or cutting
    • 1.03 SUBMITTALS
      A. Manufacture’s Product Data sheets.
      B. Submit three (3) each, samples 3” x 4”
    • 1.04 WARRANTY
      A. Provide manufacture’s standard limited warranty document executed by an authorized company official.
      B. Panel manufacturer shall warrant the panels, it supplies will be free from defects in material and workmanship for a period of two (2) years from substantial completion.
      C. Panel manufacturer shall warrant that the painted finish will not chalk, crack or peel for a period of twenty (20) years from substantial completion. INSULATED
    • 1.05 PRODUCT DELIVERY, STORAGE AND HANDLING
      A. Materials will be delivered to the site in an undamaged condition. Use care in handling and hoisting of panels during transportation and at jobsite. All panels and component parts to be stored above grade, on pallets or blocking, out of contact with the ground under protective covers, inside the building, or in storage trailers, so as to prevent damage, warping, bending, or condensation from forming between the panels.
      B. Prefinished panel exteriors shall be protected with strippable vinyl masking during manufacture, delivery, storage, and installation. Follow manufacturer’s recommended instructions for the removal of the masking.
      C. All damaged panels shall be removed from the site and replaced with new panels at no additional cost to the owner. All materials shall be new and of the best quality. Materials shall be delivered and stored on site in sufficient quantities to allow for the continuity of the work.
      D. All materials shall be protected at all times from damage of all kinds, including scratches, dents, stains, and deformation. No damaged materials shall be incorporated into any of the work. Protection during installation shall be the responsibility of the contractor.
    • 1.06 PRE-BID QUALIFICATIONS
      A. All products other than those referenced herein, must be pre-qualified (by manufacturer and /or contractor) at least ten (10) business days prior to the bid date for consideration. A contractor entertaining submission of a bid proposal must furnish a sample panel, complete with manufacturers literature describing all materials and manufacturing processes, and additional information as shown below:
      1. 1. Sample must be same type in which bid will be based upon.
      2. 2. Provide documentation showing manufacturer has been in business producing
      3. 3. Provide evidence that the installer has been in business installing similar type products for a minimum of five (5) years.


    PART 2 - PRODUCTS

    • 2.01 DISRIBUTOR
      A. Columbia Architectural Products, Inc. dba Metal Panel Store located in Beltsville Maryland 20705 (301-937-4383) www.metalpanelstore.com
      B. Other manufacturers offering products will be considered acceptable as equal, provided the materials submitted meet or exceed all of the qualities and design standards as specified herein. Products will be considered acceptable, provided those products are bid in strict compliance with this specification and requirements of this project, (refer to Item1.06, A). The Owner reserves the right to disapprove alternate manufacturers for aesthetic as well as functional reasons.
    • 2.02 INSULATED METAL GLAZING PANELS
      A. Panels are to be 1/4” nominal thickness, single face.
      1. 1. Face: .013 aluminum. (stucco embossed).
      2. 2. Finish: as selected from manufacturer’s standard colors.
      3. 3. Substrate: 3/16” plywood.
      4. 4. Back: Foil aluminum. (smooth).
    • B. Panels are to be 1/4” nominal thickness, double face.
      1. 1. Face: .013 aluminum. (stucco embossed).
      2. 2. Finish: as selected from manufacturer’s standard colors.
      3. 3. Substrate: 3/16” plywood.
      4. 4. Back: .013 aluminum. (stucco embossed).
    • 2.03 FABRICATION
      A. Panels are to be produced in a controlled environment using state of the art automated laminating equipment. Heated adhesive applied to each surface by an automated reciprocal spray system assuring an even coverage to the exact thickness required for proper adhesion of all parts. Minimum 100 lb. pressure evenly applied with an automated rotary pinch roller to assure a high strength bond.
    • 2.04 ACCESSORIES
      A. Moldings, angles or stops as required providing a weather tight installation.
      B. Sealants as recommended for use as an infill panel component.
    • 2.05 FINISHES
      A. Exposed aluminum surfaces: All exposed surfaces of insulated metal glazing panels shall be finished with manufacturer’s high-gloss, factory-baked, polyester paint finish standard 2-coat thermo-cured system composed of specially formulated inhibitive primer. Exposed surfaces shall be clean of oils, dirt, and free of blemishes. Color shall be selected by Owner from manufacturer’s standard colors. The back face shall have either mill foil for single face panels or .013 stucco embossed aluminum for double face panels.


    PART 3 - EXECUTION

    • 3.01 PREPARATION AND INSPECTION
      A. Verify existing wall opening conditions to determine that all conditions required for installation of panels are within tolerances acceptable and are ready to receive the work of this section.
    • 3.02 INSTALLATION
      A. Verify existing wall opening conditions to determine that all conditions required for installation of panels are within tolerances acceptable and are ready to receive the work of this section.
      B. Use only skilled tradesmen and complete all work in strict accordance with the manufacturer’s specifications and recommendations for the installation of the panels and associated components as well as the approved project shop drawings and these specifications.
      C. All panels shall be installed with setting blocks in a fixed glazed window system as indicated on shop drawings. Install panels and other components securely in place, with provisions for thermal and structural movement.
      D. Exposed surfaces shall be kept clean and free from sealants, metal cuttings, hazardous burrs, and any other foreign materials. Stained, discolored, or damaged panels shall be removed from the site.
      E. Perform all glazing operations to completely seal metal to metal contact surfaces. Use sealants as recommended for use as an infill panel component.
    • 3.03 ADJUSTMENTS, PROTECTION, AND CLEANING
      A. Clean aluminum surfaces promptly after installation of panels in accordance with the manufacturer’s instructions. Exercise extreme caution to avoid damage to finish. Do not use abrasives, caustic, or acid cleaning agents in cleaning surfaces of panels. Thoroughly clean all surfaces of any excess sealant prior to sealant curing, compounds, dirt, handling marks, or other substances by using cleaning agents acceptable to the panel manufacturer. Touch up all scratches, abrasion, blemishes, and other defects in the prefinished metal surface with factory supplied finish materials.
      B. Initiate all protection and other precautions required to ensure that panels will be without damage or deterioration (other than normal weathering) at time of acceptance. Send copy of written recommendations for maintenance and protection of panels to the Owner following Substantial Completion of Panel Contract.

    Tech Data

    1/4" Omega-Ply® Veneer Glazing Panel


    PRODUCT DATA SHEET

    • Product Name
      1/4" Omega-Ply® Veneer Glazing Panel

      1. Distributor:
        Columbia Architectural Products, Inc. 10722 Tucker Street Beltsville, Maryland 20705 phone: (301) 937-4383 fax: (301) 937-6850 web: www.metalpanelstore.com

        1. Panel Description
          Omega-Ply® panels provide a decorative accent for fascias, soffits, and storefronts. High impact-resistant plywood core provides exceptional strength and rigidity. Panels are easy to handle and install at a very low cost using extruded moldings or set in curtain wall framing. Unlike plastic cores, the wood cores of Omega-Ply® panels can absorb water; consequently, special attention to caulking is essential for long-lasting, high quality appearance.

          Omega-Ply® panels provide a decorative, yet exceptional strong and durable surface with excellent wind and impact resistance. Although each panel contains a rigid, wood core, a 4 x 8-foot panel weighs less than 40 pounds.

          Panels can be cut on site with standard carpentry tools. Traditional, one piece moldings are recommended for use with Omega-Ply® panels. All panels are masked to protect them throughout the installation process.

          Stock sizes are 48" widths x 96" & 120" lengths. Available in 3 stucco Embossed colors.

          Using Laminators' durable, one piece moldings, no shop drawings or expensive engineering studies are needed. During panel fabrication, cold pressing improves flatness of the panels when installed... a very flat, uniform surface is achieved for avery low, total installed cost.

          1. Panel Composition

            The 1/4" Omega-Ply® panel is made up of .013 aluminum stucco embossed face, 3/16" exterior grade plywood substrate, and .013 stucco embossed back on the double faced panels and mill aluminum foil back on single faced panels.

            1. Other available Options:

              Trim Moldings; "J" Channels, "H" Channels, "Inside corner/Drip Edge" ,"Outside Corners", "Z" Reveal Edge, Plastic "Snap-In"

              1. Features and Benefits

                The Omega-Ply® veneer glazing panel durability and beauty to the building envelope. Applications include;

                Fascias, In-fill panels, soffit, canopies, Storefronts, opaque glazing, spandrels, sunrooms

                1. American Society for Testing & Materials (ASTM)

                  * ASTM B209-96 - Aluminum and Aluminum-Alloy Sheet and Plate * ASTM G-23 Type EH Apparatus)

                  * ASTM C481-94A - Laboratory Aging of Sandwich Construction

                  * ASTM E84-96A - Surface Burning Characteristics of Building Materials

                  * ASTM E330 - Structural Performance of Exterior Windows, Curtain Walls, and Doors by Uniform Static Air Pressure Difference .

                  1. Columbia Architectural Products, Inc. Manufacturers of Fine Architectural Products
                    Product manufactured by Laminators Inc.