Online Purchase

Bullet Resistant Architectural Panels ARMORCLAD™ Armortex®

Bullet Resistant Architectural Panels  ARMORCLAD™ Armortex®
    Call Factory for Estimate (1-301-937-4383).

    Email for Quote
    Ballistic Protection Level:
    Levels I - III and VI
    Level IV
    Levels V and VIII
    Level VII
    Size:
    Finish:

    Product Description

    Bullet Resistant Architectural Panels

    Our Exclusive ArmorClad™ Architectural Ballistic Metal Panels have Armortex® Fiberglass Cores to provide the maximum bullet resistance available today in a variety of UL 752 ballistic protection levels. Fiberglass cores are manufactured by Armortex® Armorclad™ Bullet Resistant Architectural Panels are manufactured and assembled exclusively in our Factory; CAP Industries Inc., in Beltsville Maryland.



    Bullet Resistant Protection Levels Available:
    Levels I - III and VI
    Level IV
    Levels V and VIII
    Level VII

    The Fiberglass Bullet Resistant Cores are carefully and thoroughly inspected in their state of- the-art facility near San Antonio, Texas. The cores are then shipped to our Factory; CAP Industries near Washington, D.C., where they are once again inspected and assembled into Architectural pleasing wall panels. ArmorClad™ Bullet Resistant Architectural Panels are carefully inspected and assembled to ensure the highest quality product available.

    ArmorClad™ panels can be custom made to fit any room condition. Features & Benefits: CAP Industries ArmorClad™ Bullet Resistant Architectural panels are specifically designed for retrofit interior applications without the need to take down or rebuild existing walls to address the threats to facilities and occupants. Active Shooter Protection Solution. Easy and quick installation, these panels are available in widths up to 46" and heights up to 10 feet. ArmorClad™ Architectural panels are for use in many locations: Courtrooms * Judge's Bench * Government and Corporate offices * Bank Teller Counters * Banks Safe Rooms for Public & Private Schools and Institutions *Gas Stations/Convenience Stores * Residential Safe Rooms * Executive Safe Rooms * US Embassies * Police Stations * Military Bases * Check Cashing Store Facilities * Cashiers Booths * Prisons.

    Any place where ballistic and attack resistant products are desired or required.

    Specifications

    Bullet Resistant Architectural Panels Specifications Section 13 47 00


    PART 1 - GENERAL

    • 1.1 REFERENCE
      The publication below forms a part of this specification.
                              UNDERWRITERS LABORATORY UL 752 11th Edition
                              Standard for Bullet Resisting Equipment dated Sept 5, 2005
                              AMERICAN SOCIETY FOR TESTING AND MATERIALS
                              ASTM E119-00a Standard Test for ONE HOUR FIRE RATING
                              of building construction and materials.

    • 1.2 SUBMITTALS
      The following shall be submitted in accordance with Division 1 and the SPECIAL CONTRACT REQUIREMENTS: Submit for approval prior to fabrication catalog cuts, brochures, specifications, U. L. LISTING VERIFICATION, proof of possession of PRODUCT LIABILITY INSURANCE in an amount not less than Five Million U.S. Dollars, and printed data in sufficient detail to indicate compliance with the contract documents and the manufacturer's instructions for the installation of Bullet Resistant Fiberglass Composite Panels. The fiberglass composite provider must be ISO 9001:2008 Certified with proof of certification from an accredited registrar. Furnish verification of compliance with ASTM E119-00a ONE HOUR FIRE RATING from a recognized testing laboratory.

    • 1.3 DESIGN
      Through the design, manufacturing technique and material application the Bullet Resistant Fiberglass Composite shall be of the "non-ricochet type". This design is intended to permit the capture and retention of an attacking projectile lessening the potential of a random injury or lateral penetration.

    • 1.4 DELIVERY, STORAGE AND HANDLING
      Deliver the materials to the project with the manufacturer’s U. L. Labels intact and legible. Handle the material with care to prevent damage. Store the materials inside under cover, stack flat and off the floor.

    • 1.5 WARRANTY
      All materials and workmanship shall be warranted against defects for a period of two (2) years from the date of receipt at the project site.



    PART 2 - PRODUCTS

    • 2.1 ARMORCLAD BULLET RESISTANT ARCHITECTURAL PANEL
      The panel facing shall be made of a minimum 20 ga. Stainless Steel or .032 aluminum. Finish as selected by Architect from manufacturer’s standard selection. Bullet resistant core shall be ARMORTEX® multiple layers of woven roving ballistic grade fiberglass cloth impregnated with a thermoses polyester resin and compressed into flat rigid sheets. The production technique and materials used shall provide the controlled internal delamination to permit the capture of a penetrating projectile. Bullet Resistant fiberglass composite panels shall be ARMORCLAD™, as manufactured by CAP Industries, Inc., Beltsville, Maryland 20705. Phone: (301)-937-4383, (866)-583-2726, Fax: (301)-937-6850, www.metalpanelstore.com. Unlisted bullet resistant composite products will not be considered acceptable or equal.

    • 2.2 SECURITY LEVEL
      The Bullet Resistant Fiberglass Composite panel(s) must be UL Listed rated for level (( )).

    • 2.3 SUBSTITUTIONS
      Other UL Listed bullet resistant fiberglass composite products are acceptable if in compliance with all requirements of this specification. Alternate products must be submitted to the architect for approval two weeks prior to bidding.


    PART 3 - EXECUTION

    • 3.1 SUPPORTING MEMBERS
      Prior to installing the bullet resistive material the contractor shall verify that all supports have been installed as required by the contract documents and the architectural drawings.

    • 3.2 JOINTS
      All joints shall be reinforced by a back-up layer of bullet resistive material. The bullet resistance of the joint, as reinforced, shall be at least equal to that of the panel. Minimum width of reinforcing layer at joint shall be 4" (2" on each panel or a 2" minimum overlap).

    • 3.3 APPLICATION
      Armor shall be installed in accordance with the manufacturer's printed recommendations. Armor panels shall be adhered using an industrial adhesive, mastic, screws or bolts. Method of application shall maintain the bullet resistive rating at junctures with the concrete floor slab, the concrete roof slab, the bullet resistive door frames, the bullet resistive window frames, and all required penetrations.

                                                                        ** End of Section**

    Tech Data

    Product Name:

    ARMORCLAD™ Bullet Resistant Architectural Panels

    Manufacturer

    Columbia Architectural Products, Inc.
    10722 Tucker Street
    Beltsville, Maryland 20705
    phone: (301) 937-4383
    fax: (301) 937-6850
    web: www.metalpanelstore.com

    Panel Description:

    ArmorClad™ Architectural panels have Armortex® fiberglass cores to provide the maximum bullet resistance available today in a variety of UL 752 ballistic protection levels.

    Fiberglass cores are manufactured by Armortex®. They are carefully and thoroughly inspected in their stateof- the-art facility near San Antonio, Texas. The cores are then shipped to CAP Industries near Washington, DC., where they are once again inspected and assembled into Architectural pleasing wall panels. ArmorClad™ Bullet Resistant Architectural Panels are carefully inspected and assembled to ensure the highest quality product available.

    Stainless Steel Finish Options:

    bullet resistant  panel  options
    Bullet Resistant Architectural Panel

    Level 7, 1-1/8" Panel Thickness Shown Above:

    5.56mm Rifle, 55 GR FMJ Multiple Shots Tested .

    Size Options:

    ArmorClad™ panels can be custom made to fit any room condition. Panels also available in stock sizes as follows:

                              Levels 1 thru 3                                       36" x 94"     36" x 108"     36" x 118"                     46" x 94"     46" x 108"     46" x 118"

                              Levels 4 thru 8                                                 36" x 94"     36" x 108"                                           46" x 94"     46" x 108"

    Features & Benefits:

    CAP Industries ArmorClad™ Architectural panels are specifically designed for retrofit interior applications without the need to take down or rebuild existing walls to address the threats to facilities and occupants. Quick and easy installation, these panels are available in widths up to 46" and heights up to 118".

    ArmorClad™ Architectural panels are for use in many locations:

    Courtrooms *   Government and Corporate offices *  Banks *  Safe Rooms for Public & Private Schools and Institutions *  U.S. Embassies *  Police Stations * Military Bases *  Check Cashing Facilities *  Cashiers Booths *  Prisons

    Any place where ballistic and attack resistant products are desired or required.

    Full Brochure Bullet Resistant Architectural Panels
    As Follows:
     Bullet Resistant Architectural Panel Data Chart
    Bullet Proof Resistance Performance Data Chart
    Bullet Proof Resistance Performance Data Chart